Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's discreet, does not use LED indicators or key fobs and is concealed in the wiring of your vehicle.
ghost immobiliser and tracker permits the user to turn off the system temporarily by using Transport Mode to use it when they are renting out their vehicle. This guide will walk you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against key cloning, hacking and relay attacks. The system links directly to your car's ECU and is protected by a unique pin code of your choice. It's inaccessible to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled by circuit cuts.
The system is simple to use, however it's important to have professional installation to ensure a clean and secure connection to your vehicle's ECU. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complement your vehicle's protection package.
To prevent an accidental deployment of airbags or short circuits The installer must first disconnect your battery. Once the battery is disconnected, the installer can start working safely. Basic hand tools are useful for making precise connections and a multimeter can be used to test the electrical properties and safety. Cable ties and insulation tape are also vital for protecting connections and keeping wiring neat. The user's manual provides specific guidance tailored to your Ghost Immobiliser model.
During the installation, it is important to choose a grounding point that's free of paint and debris. Installers should also make sure that the immobiliser's wires, CAN H and the CAN L are connected to the proper ECU ports. The wires can be plugged into or soldered, depending on the model. Using a high-quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the customer after the installation is completed. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. The customer must press the service icon on the dashboard five times within two seconds. After this is done the system will verify with 5 indication signals.
ghost immobiliser price is TASSA approved and is a highly efficient immobiliser. It's a great option for those who rent their vehicles regularly through platforms like Turo. An immobiliser can reduce insurance costs, since it reduces the risk of theft.
Getting Started
If you are looking for a solution to safeguard your vehicle from theft You can't go wrong with an autowatch ghost immobiliser. ghost immobiliser and tracker protects your vehicle from starting even the theft or copies the key. It's possible due to its advanced technology that prevents the engine from starting until the correct PIN code has been entered.
The device works by connecting to the vehicle's CAN bus network, allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and wheel to create a unique sequence that only you can identify which makes it impossible for someone else to start your car. This is the most secure way to protect your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing a Ghost immobiliser is easy, but you must follow the directions to avoid electrical problems and malfunctions of the system. First, you need to locate and determine a constant 12V power source as well as an adequate grounding point on the vehicle's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a solid connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to avoid short circuits of electricity.
Once the wires have been connected, you can connect the battery and start the engine to test whether the immobiliser works. After you've verified that everything is functioning properly, you can install the immobiliser in a safe location in the vehicle. Make sure to cover it in a secure manner to ensure that thieves cannot tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it meets the highest standards of security and is an excellent deterrent to car thieves. It provides superior protection against key cloning, hacking and relay attacks, and can't be disabled without knowing the code. The device is simple to use, and it can be set to the service valet setting to ensure that your vehicle will not be activated if you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's specifically designed to deter theft of vehicles. It is directly connected to the car's CAN bus network and communicates with the ECU, making it virtually undetectable to your car. Ghost Immobiliser doesn't interfere with your vehicle's factory settings, unlike other aftermarket systems which require the removal of circuit elements.
The system is also undetectable by thieves using scanners for diagnostics. This is because the system doesn't send and receive radio frequency signals and it utilizes CAN data to communicate with your ECU. Additionally, it doesn't require any modification to your vehicle's existing key fobs.
Enter the sequence to disarm (either two or one buttons) and then switch on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. You are now able to begin driving your car safely.
Once installed, the Ghost Immobiliser protects your car against key cloning or hacking while protecting its value. If you ever have to surrender your vehicle to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) and a grounding point to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and safe to touch. It's also recommended to use cable tie to secure and bundle the wires, since this will decrease the chance of tampering by potential thieves. To avoid making mistakes, double-check these points and mark them using a label or tape. It's important to examine every connection for signs of wear and tear. Connections that are loose can cause system malfunctions, so be sure they're securely in place and securely insulated. Don't forget to test the Ghost Immobiliser after installation is complete. This will make sure that the unit is working correctly and that all connections and insulation are secure. Make sure to address any issues as soon as they arise.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that is integrated into your vehicle's ECU to stop unauthorised engine start. Its cutting-edge technology safeguards your car from hacking, key cloning, and other methods that thieves employ to steal cars. The Ghost also works in conjunction with existing alarm and tracking systems to offer the most complete protection for your vehicle. This system's unmatched features and discreet design make it a preferred option for car enthusiasts and security-conscious drivers alike.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow all steps of the installation process. The best place to start is to refer to the vehicle's wiring diagram, which will serve as a guideline to locate and connecting the required wires. Then, you'll need to determine the power source and grounding points. Once you've identified these then you'll need to mark them so that they're easily identifiable when installing. In addition, it is essential to use high-quality tools and materials. Basic hand tools can assist to make precise connections and a multimeter can verify electrical values and ensure security. Insulation tape and cable tie will keep all connections neat. Finally, a user manual will give specific guidelines specifically tailored to your Ghost model.
It is important to test the system prior to installing it. Enter the PIN code into the system, and then start the vehicle. This will ensure that the immobiliser is working as it should and will stop vehicle starts that are not authorized. It is recommended that you perform this step regularly as part of your regular vehicle inspections to ensure that the system is working properly.
After the installation has been completed, you can begin driving your car with confidence. The Ghost will keep your car and its contents safe from potential thieves, ensuring that nobody can drive off with your vehicle without the correct PIN. The Ghost can also be linked with a tracker that is approved by Thatcham to identify any attempts to tamper with or steal your vehicle, allowing you to locate your vehicle if it's stolen.
The Ghost is compatible with a wide variety of automobiles, including those from the majority of major manufacturers. If you're interested in securing your car using this advanced device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA Registered installer, a certification that guarantees that we adhere to the strictest guidelines and procedures when installing our products. This assures insurance companies, customers and law enforcement officials that all installations are performed in a safe and correct manner.