Autowatch Ghost 2
Autowatch Ghost 2 is a revolutionary vehicle immobiliser that guards against key-long theft, cloning, and relay theft. It's a small device that operates in complete silence and requires a unique pin code sequence using buttons already located on the steering wheel or on the centre console.
It's totally undetectable to criminals using diagnostic tools because it does not emit radio signals. It's also convenient because it does not require a tracker or additional fobs.
Cost of installation
A ghost immobiliser or ghost alarm, is a discrete device integrated into the CAN data network of a car. It does not require any additional LED indicators or fobs. This makes it virtually unnoticeable to thieves and operates on a different principle than the standard car alarms. It stops the vehicle from starting until a certain sequence of buttons is initiated by the owner. This ensures that only the correct person can drive the vehicle, and decreases the chance of your joy and pride being stolen.
Ghost immobilisers cost less than traditional devices and can be fitted in your vehicle in just a few hours with qualified technicians. They can be installed on multiple vehicles, making them a cost-effective way to enhance the security of your car. You can also utilize an immobiliser ghost with a car tracking system that will provide an additional level of security for your vehicle.
Modern cars are easy to target for thieves with sophisticated devices that can copy remote keys, unlock the vehicle, and then take it away. It is essential to secure your car by installing a ghost immobiliser. It will stop your car from moving until you press a particular sequence of buttons. This will give you peace of mind if you're giving your car to valet parking or hiring an employee.
The Autowatch Ghost 2 is a cutting-edge car protection system which protects against modern theft methods like key cloning. This small electrical device plugs into the CAN system in your vehicle and disables the motor after you enter a code. It's a discrete hidden device that isn't affected by signal jamming or device spoofing. It also has the added benefit of sending alerts to your mobile phone in case someone tries to interfere with your vehicle.
The Autowatch Ghost 2 immobiliser is priced at PS499 including VAT and can be fitted in just a few hours at your office or home by one of our highly skilled TASSA (Autowatch) registered, DBS-security checked installers. It is a low-maintenance product that is portable from vehicle to vehicle. It is compatible with the majority of CAN-bus systems.
Cost of replacement keys
The Autowatch Ghost is a sophisticated piece of technology that provides advanced protection against key-cloning hacking, vehicle theft and key-cloning. It does not require additional key fobs and LED indicators or any other devices. Our qualified technicians can install it in most cars and vans within just a few hours. The system can be utilized in conjunction with car trackers to provide an additional level of security.
The system is connected to your vehicle's CAN data network and therefore untraceable by thieves. It will not cause diagnostic lights to come on, because there are no radio signals. The criminal won't be in a position to gain access to the OBD port of your vehicle either, since it is directly connected to the ECU. This will stop them from acquiring new key fobs or replacing the ECU which would normally allow them to start the engine.
The ghost immobiliser also completely sealed and concealed within the vehicle harness. This makes it virtually impossible for thieves to locate. The system generates a unique pin code by pressing the buttons on the steering wheel or dash. It must be entered to start the vehicle. Monty's also offers a Service/Valet Mode, which allows the vehicle to be started without the PIN code. This is useful if you're transferring your vehicle over to a mechanic or valet parking service.
If the PIN code sequence is not entered then the CAN Ghost will prevent the vehicle from moving, or stall the engine and gear box - depending on your specific vehicles needs. It can be connected to a vehicle tracker so that you can see the position of your vehicle's location on a map with any device that is connected to the internet.
The system is incredibly easy to install and is able to be moved from vehicle to which makes it a great option for classic and sports cars. It does not require batteries or power cables because it is wired into the CAN data network of your vehicle. It is almost unnoticeable and can be set up in several hours by our TASSA-registered DBS-security-checked and trained technicians.
Cost of replacing a car
Autowatch Ghost immobiliser gives sophisticated protection against key hacking and copying. It works by directly integrating with the vehicle's ECU, creating a barrier that is nearly impossible to breach without the correct PIN code. Additionally the system is TASSA tested and approved by insurance, making it a top option for those looking to improve their car's security. This system could save you money on car insurance as most insurers give discounts to vehicles that are equipped with this system.
The Ghost system is invisible to thieves, and it operates without radio signals. It connects to your vehicle's CAN data network and requires a unique PIN to start your engine. It also prevents hackers from gaining access to the system via diagnostic scans or tampering with the OBD port on your car. The device also uses an algorithm that can identify and blocks cloned keys.
While it is possible to install Ghost immobilisers yourself, the process can be risky. It must be performed by a trained professional. An incorrect installation could damage the wiring of your vehicle and render the device ineffective. A DIY installation may also void the warranty of your device and the vehicle.
Most Ghost users report high levels of satisfaction with the device. They appreciate the additional layer of security and peace of mind it provides to their lives. The device is also simple to use and discrete in appearance. Most of them are happy with the fact that it will safeguard their vehicle from theft even if they lose their keys.
Some customers have reported issues with the device’s stop/start function. This could be caused by an improper configuration or a problem independent of the Ghost immobiliser. These kinds of issues are uncommon however they can be easily solved by contacting the company who installed the Ghost.
A professional Ghost installation is recommended since the device could be expensive to repair or replace if it's damaged by an experienced hacker. To avoid this, make sure that the installer has a strong track record and is a certified. A reliable installer will be dedicated to customer satisfaction, and will stand by the quality of their work.
Cost of insurance
A ghost immobiliser is an anti-theft device which stops thieves from starting your vehicle. It connects to the car's CAN data network and creating a unique PIN code sequence that needs to be entered prior to the engine starts. The device is easy to move between vehicles and requires no batteries or power cables. It can also be used to supplement the traditional car alarm system or as an alternative. It is also easily programmed to work with a brand new vehicle, if you're planning on selling or trading your car in the future.
The autowatch ghost is immobiliser that can be easily installed and isn't easily detected by thieves. It makes use of the buttons on your car to input your PIN code. This makes it difficult for thieves find its presence. It is also extremely robust and weatherproof, meaning it is able to endure any kind of weather. This makes it perfect for classic, sports and luxury vehicles that require battery isolation when parked for long periods of time.
This cutting-edge technology stops the cloning of signals and bypassing door locks by connecting directly to CAN. It is a TASSA certified immobiliser that is regarded by insurance companies as an effective theft deterrent. It also has one of a kind feature, Stealth Active. This is unnoticeable by key cloning devices.
In contrast to other immobilisers for cars, the Autowatch ghost is a low-maintenance device which does not require wiring, which means it doesn't interfere with your vehicle's electrical system or its aesthetics. The installation process is easy and can be performed by a skilled technician. It is important to remember however that the device may be damaged if it is installed incorrectly. It's essential to engage a professional to install the device to protect your vehicle.
While many opt to install a ghost immobiliser themselves, it's important to seek help from a professional if you're considering this option. You could cause electrical faults or misconnect wires if you attempt to install it yourself. Furthermore, improperly placed wires can make the device useless or accessible to thieves. For this reason, it's a good idea to incorporate an immobiliser in conjunction with other security measures, such as GPS tracking and alarm systems. This will provide you with the best chance of getting a reduced insurance premium.